HobbyWing UBEC 10A (2-6S) 6.0V-8.4V External BEC

Description

Hobbywing 10a External BEC 

The UBEC uses an efficient DC-DC regulator chip with a conversion efficiency of more than 90%. The all-metal housing is designed to help dissipate heat and reduce electromagnetic interference. UBEC output voltage is adjustable in three stages (6.0/7.4/8.4 V) with a continuous current of 10A and a maximum of 15A. The voltage specifications allow the use for a wide range of servos and electrical equipment such as lights, winches, wipers and etc. At the same time, the UBEC is equipped with overcurrent protection, output short-circuit protection, overheat protection, and IP67 waterproof dust design, and can be widely used on all electric models.

Specifications

Model：UBEC 10A-Car
Input voltage：2-6s lithium batteries
Output voltage：6.0 / 7.4 / 8.4 V (3 options adjustable)
Output current：Continuous 10A，Instantaneous 15A
Measurement：45*20*16.2mm
Weight ：34g（including wires）

Features

•  Using advanced DC-DC regulator chip with conversion efficiency exceeds 90%;
• 4 options for the output voltage, applicable for all kinds of receivers/gyros/servos, etc.
•  BEC shoot-through protection, which prevents the input voltage from directly flowing to the output end and causing damages to receivers, servos, and other electronic devices;
• Alternate protection such as over-current protection, short-circuit protection (at the output end) and thermal protection make the unit safre and more reliable;
• Two cables are connected in parallel at the output end of the UBEC, allow a larger current to flow into the receiver.
• Status LED, which lights up when the output voltage is within the normal range;
• The external switch can turn on/off the UBEC easily;
• Aluminum case promotes heat dissipation & EMI (Electromagnetic Interference) reduction.