Description
Designed for 3D Pro pilots and beginner alike the Spartan Vortex range of flybarless systems will amaze you with their performance and features. Its simple and intuitive installation make it the ideal choice for pilots who are venturing for the first time into RC helicopters and flybarless systems.
Tail – Based on Spartan’s market leading gyro technology the Vortex VX1n is capable of delivering exceptional tail hold and consistent yaw rates even at eye-blurring speeds of over three full turns per second.
Rotor – The cyclic and collective controls are smooth and precise with a very solid feel and impressive response time. Factory calibrated sensors and Spartan’s proprietary piro compensation technology enable your helicopter to remain locked in through piro moves.
Governor – The built in governor provides Nitro and Electric* modes and support for both magnetic and phase sensors. Cross mixing and look-ahead algorithms ensure that power is delivered in time and not as a result of RPM decay.
Receiver – The Vortex VX1n supports SBUS & PPM single wire receiver connections, 1 or 2 Satellites and individual channel connections to traditional receivers. Additional channels provided by SBUS, PPM & Satellite receivers can be routed to the three AUX outputs.
Setup – Using the Spartan DataPod field programmer your new Vortex VX1n can be installed and configured in minutes. Adjustments can also be done at the field without the need to carry a computer. The DataPod also doubles as USB interface enabling the Vortex VX1n to receive firmware updates.
Power – The Vortex VX1n operates at both classic 5V and high voltage 8.4V (2S) power systems. The DataPod port of the Vortex VX1n also doubles as secondary power connection point when additional current is needed for high torque servos.
The easy setup, high vibration immunity, and unparalleled performance are guaranteed to give a hassle free installation and enjoyment of your hobby. Backed up with Spartan’s industry-leading warranty and including 3 years free repair service and 50% RRP discounted crash replacements the Vortex VX1n offers market leading performance, exceptional value and reassurance.
Key features:
- Designed for all helicopters; from the smallest electric to the largest nitro
- Market leading tail hold and pirouetting consistency
- Small and lightweight
- Suitable for normal, DFC, rigid and multi-bladed rotor heads
- Compatible with all digital tail servos (760us, 960us and 1520us)
- Compatible with digital and analog swash servos
- Compatible with standard pulse, PPM, SBUS, XBUS, SUMD and 1 or 2 satellite receivers
- Built in governor with Nitro and Electric* modes
- Superior balanced ring MEMS sensor technology
- Easy configuration and field adjustments via the Spartan DataPod. You can deploy a new system in minutes
- Firmware upgradable
- Four configuration memories that can be selected in-flight for different flying styles. They can be mapped to Normal, Idle1, Idle2 & Hold or as the user requires
Specifications:
Dimensions:Â 36.6 x 23.8 x 14.4mm (1.4 x 0.9 x 0.6 inch)
Weight:Â 11 grams
Sensor Type:Â Balanced ring MEMS with digital interface
Governor:Â Selectable Nitro or Electric*
Control system:Â Proprietary PID with adaptive tuning
Supported tail servos:Â Digital 760us, 960us and 1520us centre pulseÂ
Supported swash servos:Â Digital or analog 1520us centre pulseÂ
Supported receivers:Â Standard pulse, PPM, SBUS, 1/2 Satellites
Standard setup:Â DataPod
Computer connectivity:Â DataPod Bridge Mode
Operating voltage:Â 3.8V to 8.4V
Current draw:Â <100mA
Box contents:
• Spartan VX1n flybarless
• Welcome card
• Receiver cable set
• Adhesive foam pads
• DataPod
Please note: Part SRC-DTPOD (Spartan DataPod) is also required for configuring the Vortex VX1n. Only one DataPod is required for configuring all your Vortex systems as it does not need to be permanently mounted on the helicopter.
* Optimised electric governor mode is planned for future firmware update.
* Warranty and crash replacement program is offered directly by Spartan RC.
Reviews
There are no reviews yet.