XNOVA Lightning 4535-380KV shaft type E

Description

XNOVA Lightning 4535-380KV with a 6mm “Type E” 50mm shaft

Xnova brushless high performance outrunner motor designed for 12S and 14S extreme power 3D flying, from 690mm through  to 800mm blade sized helicopters where highest power to weight ratio is important. One of the most powerful motors currently available. Also a perfect fit for speed flying. This motor will bring your 800 size to a whole new level!

The Xnova team have spent incalculable hours of testing to improve the already well established 4535 series. The end result is an enhanced overall performing motor which provides cooler running and more consistent power delivery over the flight.

The Xnova V3 lightning series is the highest level of motor performance currently available on the market.

Technical Details:

The new Lightning series motors has all the advantages and design specifications of the V2 high performance XTS series, plus:

• higher efficiency due to thinner stator lamination;
• Integrated cooling system resulting in lower temperatures;
• Increased power output through implementation of thicker, hand wound, YY single strand copper wires;
• Heat resistant up to 300 degrees C;
• High-performance neodymium magnets, heat resistant up to 180 degrees C.

This 4535-380kV is specially designed for the “Logo 800 2020 Edition,” which features a plastic frame similar to that of it’s smaller brother, the Logo 700.

Specifications:

Slots & Poles: 12n10p
Winding T: 5+6 YY with 1.5mm thick wire
rpm/V: 380
Volt (V): 20 | 30 | 40 | 50
Io(A): 2.1 | 2.4 | 3.5 | 4.4
Rm (mohm): 12 | 12 | 12 | 12
Weight (without connector): 610g
Body Length (no shaft): 66mm
Diameter: 55.7mm
Shaft Length: 50mm
Shaft Dia.: 6mm
Mounting Holes CTC Distance: 30mm
Mounting Screw: 4×07
Max Eff. Curr.: 135.4
Max Eff.: 93.5
Kt (Nm/A): 0.0251
Km (Nm/sqrt(w)): 0.2294
Max Continuous Power (Watts): 6600
Peak Continuous Power (Watts) (5 sec): 13000 (2sec)
Max cont. current (A): 135

Shaft choice:

**Please note, all Xnova motors ship with the ‘A’ shaft fitted unless otherwise specified**

The 4535 series can be used with any of the shafts detailed here: